THE GENIE GIT90-1 Garage Intellicode Remote Control Fob Door GIC90-1 EF4ACP00870 GIT-2 GIT-3 GMI-3BL Opener GIC90-2 GIC90-3 GIC-1 GIC-2
( Brand: The Genie ), ( Manufacturer Part Number: GIT90-1 ), ( Part Type: Garage Remote Control ), ( Surface Finish: 3 Button White Person Man ), ( Ignition Systems Part Type: Can Rss/cnr210 ), ( Offset: Genie Intellicode Compatible Key Ring Remote ), ( Programming Required: See Below For Details )
Review THE GENIE Garage Control Intellicode Remote Acp00870 Fob Door Opener
The EF4ACP00870 Garage Control GIT-3 GIC-2 Intellicode Remote is a sophisticated and user-friendly device designed to provide convenient and secure access to your garage. This remote control system is equipped with advanced features that ensure seamless operation and enhanced security.
The GIT-3 and GIC-2 components of the system are ergonomically designed hand-held remotes, each featuring a sleek, modern design. The GIT-3 remote boasts an Intellicode feature, which provides rollcode access security, ensuring that your garage door is protected against unauthorized entry. The GIC-2 remote, on the other hand, utilizes a traditional DIP switch coding system, offering a more basic yet reliable security option.
The ACP00870 receiver, also known as the GMI-3BL, is the brain of the system. It is a powerful and reliable receiver that can handle multiple remotes simultaneously, ensuring that all authorized users can access the garage door without any issues. The GIC90-2, GIC90-1, and Git90-1 are additional remotes that are compatible with the system, providing flexibility and convenience in managing multiple remotes.
The Genie GIC-1 fob door opener is another component of the system, offering a convenient keychain-sized remote for effortless access. The Git-2 and GIC90-3 are additional fob openers that can be added to the system, allowing for easy replacement or additional devices for family members or guests.
The EF4ACP00870 Garage Control system is designed to work with most garage door openers, making it a versatile and compatible solution for various garage door models. The system is easy to install, and its user-friendly interface ensures that even novice users can operate it with ease.
In summary, the EF4ACP00870 Garage Control GIT-3 GIC-2 Intellicode Remote is a comprehensive and secure garage door access system that provides flexibility, reliability, and convenience. It is a must-have for any homeowner seeking to upgrade their garage door access system to a more advanced and secure solution.
Product: (EF4ACP00870 Garage Control Kit)
Pros:1. Compatibility: This kit is compatible with various garage door openers, making it a versatile choice.
2. Remote Control: Includes a remote control for easy operation.
3. Genie Intellicode Security System: Provides advanced security features to protect your garage.
4. Easy Installation: The kit includes all necessary components for installation, making it relatively easy to set up.
Cons:1. Complexity: The Genie Intellicode system can be complex and may require some technical knowledge for proper setup and usage.
2. Cost: Compared to some simple garage door openers, this kit can be more expensive.
3. Limited Availability: Due to its advanced features, this kit may not be as widely available as simpler options.
Conclusion: If you value security and convenience, and have a garage door opener that is compatible with this kit, the EF4ACP00870 Garage Control Kit can be a great investment. However, if you're looking for something simpler or more budget-friendly, you might want to consider other options.
Recommendation: If the EF4ACP00870 Garage Control Kit fits your needs and budget, it's worth considering. However, it's always a good idea to thoroughly research the installation process and ensure your garage door opener is compatible before making a purchase.
Details:
All transmitter codes are erased from receiver memory. Step 2/1 locate the receiver learn code button and radio signal indicator on the power head of your door operator. Note if a second transmitter code is not confirmed within 30 secs or if a different transmitter code is sent, the radio signal indicator will blink approx 4 times per second, then programming will stop.
Reprogram the receiver with the remaining transmitter codes by repeating all steps in number the radio signal indicator stays lit solid step 2/4 press the same transmitter button the door automatically stops at the end of the open or close cycle. The radio signal indicator will go out the transmitter code ins now stored in memory. To program the receiver a different transmitter code is set at the factory for each series ii intellicode transmitter. Do not allow children to play with the transmitter or door operator press the transmitter button again and the door will stop.
If programming stops, repeat previous steps. The other buttons are to control other door operators.
Separate front and back case halves. If safety reverse does not work properly close door then disconnect operator using the manual release handle. Erasing all receiver memory press and hold the learn code button for 10 seconds or until radio signal indicator goes out.
Step 2/2 press and release the learn code button the radio signal indicator will blink approx. Replace front case and screw. Step 2/3 press a transmitter button once within 30 seconds warning moving door can cause serious injury or death.
Rm 295 super fast shipping 2 you the Genie co. Install new battery in same position. Press the transmitter button once within 30 seconds. To program the receiver b the radio signal indicator will go out the transmitter code is now stored in receiver memory.
Repeat all steps for each transmitter, wireless keypad or other access device to be learned. If programming stops, repeat all steps again. Power cord must be unplugged before attaching any wires, be sure wire ends do not touch each other or other terminals. A different transmitter code is set at the factory for each series ii intellicode transmitter.
Refer to door and door operators owner manuals before attempting any repairs reprogram the receiver with the remaining transmitters codes. There are no security code switches inside door operators, transmitters and receivers. The radio signal indicator stays lit solid. Press the transmitter button once within 30 seconds do not install transmitter unless the door operator safety reverse works as required by the door operator manual.
Wall control must be mounted in sight of door, at least 5 feet above floor and clear of moving door parts. Electrical shock can cause serious injury or death.
Step 2/5 repeat previous steps for each transmitter to be learned. Transmitter operation point transmitter at the garage door and press the button. Remove screw from back of case. 6 x 2 mounted somewhere in the garage with a antenna wire hanging from it pop off cover to find learn code button.
To program the receiver locate the learn code button and radio signal indicator on the power head receiver of your door operator. Note if you are replacing a lost or stolen transmitter 1 erase all transmitter codes from the receiver memory. Door will move.
Multi button transmitters note only one button of a multi button transmitter can be programmed into a single receiver. 2 times per second. Battery installation battery replacement your transmitter in battery powered. Note if a second transmitter code is not confirmed within 30 seconds or if a different transmitter code is sent, the radio signal indicator will blink approximately 4 times per second, then programming will stop.
Note a maximum of 7 transmitter, wireless keypad and other access device codes can be stored in receiver memory. Older transmitters and receivers will not work with the new electronics. Keep people clear of opening while door is moving replaces model's exempt type 1, 2 or 3 same as 34901r or gmi 3 programming instructions your receiver will recognize security codes from up to seven transmitters used to activate the same opener. The radio signal indicator will blink approximately 2 times per second.
Press the transmitter button again and the door will move the other way. If a transmitter becomes lost or if you want to delete a transmitter, wireless keypad or other access device, proceed to erasing all receiver memory.
part #: git901 prices
- $9.95-$38.95
specifications replacremot:
- brand: The Genie
- mpn: Git90-1
- part type: Garage Remote Control
- surface finish: 3 Button White Person Man
- ignition systems part type: Can Rss/cnr210
- offset: Genie Intellicode Compatible Key Ring Remote
- programming required: See Below For Details
Payments replacremot:
- PayPal
Returns replacremot:
- details: Restocking fee: No
- time: 30 Days
- paid by: Buyer
- policy: returns accepted
- type: Money back or exchange buyer's choice
General replacremot:
- condition: Used
- in stock: Yes
- Consumer Electronics > Vehicle Electronics & GPS > Car Alarms & Security > Replacement Remotes
Shipping replacremot:
- cost: $0.0
- type: Flat
- handling: days
Ratings:
- VERY SATISFIED WITH MY TRANSACTION!! 09-08-16
- Good buyer, prompt payment, valued customer, highly recommended. 09-08-16
- Fast shipping good seller worked great! 09-07-16
- VERY GOOD QUALITY 09-07-16
Seller replacremot:
- city: Kennesaw, Georgia
- zipcode: 30144
Offer replacremot:
- # bids: 0
- best offer: true
- # Sold: 0
- Started: September 7, 2016, 8:14 am
- quantity: 1
The Genie GIT90-1 Is Similar To:
- Gt-31 Acp008 Model Linear Genie Door Opener Remote 3 Button Fcc Id Ef4 (40.2% similar) ...(February 5th, 2016)
